iklan ads
If you are interested in military or aviation technology, you see one piece of equipment mentioned time and time again. Radar (short for Radio Detection And Ranging) is a way of locating objects and telling important information such as the direction in which those objects are traveling, how far away they are from a given point and how fast the object is traveling. The monopulse comparator is an important component of modern radar systems and has done much to make these systems more reliable and accurate.
Although radar systems were initially used by the military to detect approaching aircraft and other potentially hostile objects these systems are being used in many other ways these days. Motorists are likely familiar with the guns used by police in order to detect speeding vehicles. The signal can bounce off of a vehicle and travel back to the gun in order to give the officer an idea of how quickly a particular car is traveling.
Anyone who has seen a weather forecast has taken advantage of the information that radar can give us. Meteorologists will use the information given to them by Doppler radar to track changes in weather systems. It can help alert us to the formation of storm fronts which may develop from thunderstorms to tornadoes or hurricanes.
While many people think that these systems can just be used on land, this is not true. Marine radar will bounce signals off of nearby objects. This shows a ship where it is (by detecting the shoreline or marine buoys) or whether there are other ships in the same area.
There are several components that make up a radar system. The signal is generated by a transmitter. This is sent out to an antenna by a waveguide. A duplexer that is connected to the antenna switches the system from sending to receiving and the resulting signal is then captured by a receiver. The information is processed and sent to a display processor so that the radar operator can see a visual picture of what the system has picked up.
Jamming was an issue in the past but it is not as much of a problem with the modern monopulse systems that are being used. Because these systems rely on radio frequencies to detect objects, if a radio signal of the same frequency was directed at the radar system itself it tended to interfere with the signal and the system could not produce an accurate image. The monopulse system, because of the way it is set up, makes jamming much more difficult.
With modern systems, a single beam is emitted that is then split into two sections. They are directed in the same general direction but because they are positioned in slightly different ways it is possible to compare the returning signals to make sure that the results are accurate. A comparator is the device used to combine the signals into the single cohesive image that the radar operator will interpret.
There are several different types of these devices. The type that you choose will depend on exactly which kind of radar system you have set up. You can find comparators online although generally only on specialty websites that offer other radar equipment as well.
Although radar systems were initially used by the military to detect approaching aircraft and other potentially hostile objects these systems are being used in many other ways these days. Motorists are likely familiar with the guns used by police in order to detect speeding vehicles. The signal can bounce off of a vehicle and travel back to the gun in order to give the officer an idea of how quickly a particular car is traveling.
Anyone who has seen a weather forecast has taken advantage of the information that radar can give us. Meteorologists will use the information given to them by Doppler radar to track changes in weather systems. It can help alert us to the formation of storm fronts which may develop from thunderstorms to tornadoes or hurricanes.
While many people think that these systems can just be used on land, this is not true. Marine radar will bounce signals off of nearby objects. This shows a ship where it is (by detecting the shoreline or marine buoys) or whether there are other ships in the same area.
There are several components that make up a radar system. The signal is generated by a transmitter. This is sent out to an antenna by a waveguide. A duplexer that is connected to the antenna switches the system from sending to receiving and the resulting signal is then captured by a receiver. The information is processed and sent to a display processor so that the radar operator can see a visual picture of what the system has picked up.
Jamming was an issue in the past but it is not as much of a problem with the modern monopulse systems that are being used. Because these systems rely on radio frequencies to detect objects, if a radio signal of the same frequency was directed at the radar system itself it tended to interfere with the signal and the system could not produce an accurate image. The monopulse system, because of the way it is set up, makes jamming much more difficult.
With modern systems, a single beam is emitted that is then split into two sections. They are directed in the same general direction but because they are positioned in slightly different ways it is possible to compare the returning signals to make sure that the results are accurate. A comparator is the device used to combine the signals into the single cohesive image that the radar operator will interpret.
There are several different types of these devices. The type that you choose will depend on exactly which kind of radar system you have set up. You can find comparators online although generally only on specialty websites that offer other radar equipment as well.
About the Author:
You can find affordable monopulse comparator by visiting our web pages now. Why look anywhere else when you can find it all here at http://etiworld.com.
iklan ads