iklan ads
There was a time when television sets were not comprised of much more than a tube encased in wood, fuses, wires, a scanner, some knobs, and a set of rabbit ears. Like most things in today's world, televisions are more complicated now. You may never want to be a television repair person, but if you have any interest in electronics, it can be instructive to learn about the primary boards, like the T-Con d50ud1, found in LCD tvs.
When you open the back of an LCD television, you will most likely find the power supply module, or power supply board, located on the right side the back when you're looking at it. The power supply board is going to be the heaviest and biggest board on the back of your set. The function of the power supply board is to convert alternating current supply, or AC, which has the ability to change directions, to direct current voltage, DC.
The direct current will only move in one direction. This is what the circuit in LCD televisions uses. Depending on the model you have the power supply module and the inverter board may be combined. If you're not getting any power, or only intermittent power, the power supply board may be to blame.
The T-Con, or timing control board, is the board on the television that is the smallest. Only LCD tvs use it. You should look for it under its shield which will be on the top back of the television.
The function of the timing control board is to control both the circuit and the TFT driver. If the T-Con board malfunctions you might see horizontal or vertical lines or a double image. There might also be just a white screen or no display.
Inverter boards are found along the edge of your television back. Unless you have an LCD television you will not have an inverter board. The purpose of this board is to convert low voltage direct current supplied by the switched mode power supply into high voltage alternate current. This is what lights up the backlights. Sometimes it's included in the power board. If you have a dim screen or the display shuts down, you have a problem with the inverter board.
The main board is also called the main module, the digital or logic board, or the motherboard. The video and audio inputs and outputs are attached to it. The main board converts signals from analog to digital. If you're having trouble with the sound or the color, it may be the main board.
The jackpack or audio receiving board is sometimes separated from the main board. Its function is to take the sound signal to the processor and on to the amplifier which is what drives the speakers on either side of the television. If you don't have sound, or a high pitched one, or channels that change randomly, you need to have the jackpack checked out.
When you open the back of an LCD television, you will most likely find the power supply module, or power supply board, located on the right side the back when you're looking at it. The power supply board is going to be the heaviest and biggest board on the back of your set. The function of the power supply board is to convert alternating current supply, or AC, which has the ability to change directions, to direct current voltage, DC.
The direct current will only move in one direction. This is what the circuit in LCD televisions uses. Depending on the model you have the power supply module and the inverter board may be combined. If you're not getting any power, or only intermittent power, the power supply board may be to blame.
The T-Con, or timing control board, is the board on the television that is the smallest. Only LCD tvs use it. You should look for it under its shield which will be on the top back of the television.
The function of the timing control board is to control both the circuit and the TFT driver. If the T-Con board malfunctions you might see horizontal or vertical lines or a double image. There might also be just a white screen or no display.
Inverter boards are found along the edge of your television back. Unless you have an LCD television you will not have an inverter board. The purpose of this board is to convert low voltage direct current supplied by the switched mode power supply into high voltage alternate current. This is what lights up the backlights. Sometimes it's included in the power board. If you have a dim screen or the display shuts down, you have a problem with the inverter board.
The main board is also called the main module, the digital or logic board, or the motherboard. The video and audio inputs and outputs are attached to it. The main board converts signals from analog to digital. If you're having trouble with the sound or the color, it may be the main board.
The jackpack or audio receiving board is sometimes separated from the main board. Its function is to take the sound signal to the processor and on to the amplifier which is what drives the speakers on either side of the television. If you don't have sound, or a high pitched one, or channels that change randomly, you need to have the jackpack checked out.
About the Author:
See the featured products including the d50ud1 by referring to the Web. Spend a minute or two browsing the online store at http://www.tekbyus.com/product-tag/d50u-d1.
iklan ads